Flush mount ceiling lights are unique because they can be used literally anywhere in the home. Even if you have pretty low ceilings, a flush mount light fixture will still be great to use, unlike many other fixtures. If hire electrician to install, it usually takes over $100. Now you can save $100 by following the article installation guide.

   1.At first, please make sure you get Installation tool. Then, please follow the guid

Before you begin, gather together all of the tools you'll need for this project. Replacing a flush-mounted ceiling light is fairly simple, so our list of tools is too. A flat-head and Phillips screwdriver and a small adjustable wrench are all you need. If you have a power screwdriver, it'll make the job go a little faster.

Voltage tester: in installing this fixture, you will be dealing with wires, so, make sure you have this ready, because you will be needing it to check if any wire is live or not.

 2.How To Safely Turn Off The Power:Before starting, make sure to turn off all power to the light fixture. Find your breaker box and turn off all power to that room. Double-check by flipping the light switch on the ceiling fixture, and make sure the wires are live with a voltage tester. Never rely on the light switch to turn off the power.It is also advisable that you put a note over that switch in the fuse box indicating that it is off for a reason, so that someone doesn’t put it back on while you are working with wires without knowing. That would be very dangerous.

   3. How To Remove An Old Ceiling Light:If there is a fixture currently mounted there, then carefully take out the light bulbs and dismantle it. Disconnect the wires and then set it apart.

     4. How To Wire A Flush Mount Ceiling Light:

Use the voltage tester again to check if the wires are live.you can go ahead to connect the new fixture wires to the wires from the ceiling.The only thing you need to do is connect the led strips to the ends of the led splitter and plug in the female to the male on the power supply. The power will be distributed evenly and the lights will work the way they're supposed to. 

After joining the wires, hold them together with the wire nuts so that they don’t loosen. Then fold them neatly and fit them into the junction box.Make sure all wires are inside the ceiling box.Then fix the chandelier to prevent it from falling

   5.Turn Power Back On

Now, you can go back to your fuse box and turn the switch back on. Your new fixture should produce light at this point.

If it doesn’t, then you probably got it wrong somewhere, perhaps with the wiring. So, turn the power back off and go over and check again.

Make sure that the fixture wires were connected properly to their corresponding wires in the ceiling. 

Well, if you are feeling up for some home improvement, then perhaps you could consider this celling light for under 50 dollars.